Looking to build a super street class car

Tom Goldman · 11-04-2013, 11:58 AM

Probably a small diameter linkage stop will work .
I would replace the OEM throttle cable with a Morse type cable , Fabricate a bracket for the manifold end to support the cable and connect to the throttle body with a pneumatic cylinder .
Try contacting Bob Phillips at Advanced Control Devices .
He has a number of different .90 stops , most are small diameter and short in overall length .
I'm assuming you no longer are using a drive by wire throttle body .

11-04-2013, 11:58 AM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,475 Likes: 887 Liked 865 Times in 235 Posts	Re: Looking to build a super street class car Probably a small diameter linkage stop will work . I would replace the OEM throttle cable with a Morse type cable , Fabricate a bracket for the manifold end to support the cable and connect to the throttle body with a pneumatic cylinder . Try contacting Bob Phillips at Advanced Control Devices . He has a number of different .90 stops , most are small diameter and short in overall length . I'm assuming you no longer are using a drive by wire throttle body . __________________ Tom Goldman 1500 SG , 1506 STK