DSE Mini Tub Install Question

MAURICE BLENDHEIM · 03-24-2014, 10:30 AM

Dale…Exactly as Dion mentioned, take your time when finish welding starts. Prepare all surfaces to clean bare metal. I generally start from the centre of the wheel opening. Don't be afraid to add another series of tacks between your originals. Then stitch weld, moving from side to side till complete, this way you will allow heat to dissipate as you make progress. You would be amazed how much something can move with such a small amount of weld. "Your attention to detail in the construction will yield the best starting line results". MB.

03-24-2014, 10:30 AM	#8
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 569 Likes: 311 Liked 284 Times in 87 Posts	Re: DSE Mini Tub Install Question Dale…Exactly as Dion mentioned, take your time when finish welding starts. Prepare all surfaces to clean bare metal. I generally start from the centre of the wheel opening. Don't be afraid to add another series of tacks between your originals. Then stitch weld, moving from side to side till complete, this way you will allow heat to dissipate as you make progress. You would be amazed how much something can move with such a small amount of weld. "Your attention to detail in the construction will yield the best starting line results". MB.