|
|
04-14-2014, 12:35 PM
|
#1 |
|
Member
Join Date: Mar 2002
Location: Texas
Posts: 173
Likes: 0
Liked 10 Times in 7 Posts
|
Mclay 200 tail shaft seal question
I was doing a little bracket racing over the weekend when one of the track guys came to me and said I was "spraying " fluid on the track @ launch for about 60' the only thing I can find is what apppears to be tranny fluid around the area of tail shaft. My question is does Mclay take a special seal and what should I be looking for? I doubt I can walk in the nearest AutoZone and get it.
|
|
|
|
04-14-2014, 12:50 PM
|
#2 |
|
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Mclay 200 tail shaft seal question
check the vent. on the 200's the vent is toward the rear and is more susceptible to leaking fluid. I put a catch can on mine
__________________
Chad Rhodes 2113 I/SA |
|
|
|
|
04-14-2014, 12:54 PM
|
#3 |
|
Member
Join Date: Mar 2002
Location: Texas
Posts: 173
Likes: 0
Liked 10 Times in 7 Posts
|
Re: Mclay 200 tail shaft seal question
Thanks I'll check it out.
|
|
|
|
|
04-14-2014, 01:58 PM
|
#4 |
|
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
Re: Mclay 200 tail shaft seal question
Vented...
 
__________________
Rich Taylor I/SA - 321 |
|
|
|
|
04-14-2014, 02:29 PM
|
#5 |
|
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
Re: Mclay 200 tail shaft seal question
Isn't that vent tube supposed to go to a catch can?
__________________
Ed Wright 4156 SS/JA |
|
|
|
|
04-14-2014, 03:14 PM
|
#6 | |
|
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
Re: Mclay 200 tail shaft seal question
Quote:
__________________
Rich Taylor I/SA - 321 |
|
|
|
|
 |
|
|
Linear Mode
