Radia slick mounting.

Myron Piatek · 04-22-2014, 05:19 PM

I run 21 lbs of air in my 9" Hoosier radial slicks. The have moved up to 3" in the past, but I also swap them side-to-side after each weekend of racing. It's been a while since I checked, but they tend to slip a lot less once they get some runs on them.

The only thing I've done is keep the lip & bead clean to try & keep any mounting lube, soap or water, off of them. But I suppose the wheel lip could be scuffed up a bit with rough sandpaper.

I'm going to go mark them now for my next race!

04-22-2014, 05:19 PM	#2
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Radia slick mounting. I run 21 lbs of air in my 9" Hoosier radial slicks. The have moved up to 3" in the past, but I also swap them side-to-side after each weekend of racing. It's been a while since I checked, but they tend to slip a lot less once they get some runs on them. The only thing I've done is keep the lip & bead clean to try & keep any mounting lube, soap or water, off of them. But I suppose the wheel lip could be scuffed up a bit with rough sandpaper. I'm going to go mark them now for my next race! __________________ LOCOMOTION Racing