i phone app

[FireSale]

The app titled Density that I was able to locate related to welding. ..

Did find Air Density Meter for Jetting. Gives Air density, pressure, temperature, humidity and altitude based of the nearest weather station. That was 1.9 Kilometer for me in Lakewood, Washington.

Not free. Not a set of aluminum heads, either.

Dale

[Jim Wahl]

I really can't give you any more info than I already have. Those two names are all that comes up. I do know the app wouldn't have cost more than $.1.99 or I wouldn't have bought it!! It really is surprisingly close to what my PA2 and Kestral show and I have used it in the staging lanes and being so cheap it is amazing!
I don't know why you guys can't find it. I'll do some research.Jim

.

[Jim Wahl]

Okay. In the app store, go to the search mode. type in Density Altitude Calculator and there you are!! It doesn't tell me how much it is because I've already bought it. Like Mikey says "Try it! You'll like it!". Jim

.

[FireSale]

I found it but it requires me to enter a lot of info like altitude, temp and bp. I had to refer back to Air Density for Jetting to get that info. See post 11. If you need a weather station to use it, how does it help?

Dale

[Bob Schmalz]

I have an iPhone app called "My Altitude". It gives you the altitude & barometric pressure based on your location. Get the temp from a weather app and you have all you need for the "Density" app.

[tj310]

http://airdensityonline.com/results/...orth%20Dragway not sure if this works for ya ---Trevor

[FireSale]

Originally Posted by tj310

http://airdensityonline.com/results/...orth%20Dragway not sure if this works for ya ---Trevor

Interesting. When the gates open at Pacific Raceways tomorrow the density altitude is projected to be -146 ft. By the 5:00 final for S/SS it will be 599 ft.

Bookmarked it.

Dale