web site needed

Monte Howard · 10-07-2007, 06:50 PM

A long time ago someone posted a weg site you could go to that would tell you how many inches of stripe you took,all you had to do was punch in all your numbers from your run,anyone here have that web site,THANKS Monte Howard

Bill Moulding · 10-07-2007, 07:17 PM

There used to be one called FINAL-DECISION.COM but I haven't been able to get on it for a long time.

Bill

Michael Beard · 10-07-2007, 09:12 PM

Roughly, .001 at 110-115 mph is 1.9 inches. 2" per thou gets you fairly close. I think is was about 2.5" at 140 mph, just offhand.

Brister · 10-08-2007, 02:08 PM

If you can't find the website this is the formula I use:

Multiply the mph of the second car to pass the finish line by 63,360 (inches per mile) then divide it by 3,600,000 (thousandths per hour).

You are travelling 1.76" per .001 at 100mph.

100 x 63,360 = 6,336,000 divided by 3,600,000 = 1.76

This is based on a constant speed for the last 66' thus dumping/braking probably throws the formula a little out of whack. Irregardless it's probably pretty accurate and I don't know any other way to figure it.

Anybody else got any better formulas?

Steve Calabro · 10-08-2007, 02:53 PM

true win X 1.47 X speed

SSDA Hemi · 10-08-2007, 10:05 PM

Here you go:

http://www.wallaceracing.com/mov-dist.php

Monte Howard · 10-09-2007, 05:47 PM

Thanks guys.

10-07-2007, 06:50 PM	#1
Monte Howard Member Join Date: Nov 2002 Location: Potomac,IL Posts: 277 Likes: 1 Liked 60 Times in 21 Posts	web site needed A long time ago someone posted a weg site you could go to that would tell you how many inches of stripe you took,all you had to do was punch in all your numbers from your run,anyone here have that web site,THANKS Monte Howard __________________ Monte Howard 3209 STK, 3208 SS

10-07-2007, 07:17 PM	#2
Bill Moulding Junior Member Join Date: Feb 2006 Posts: 58 Likes: 0 Liked 3 Times in 3 Posts	Re: web site needed There used to be one called FINAL-DECISION.COM but I haven't been able to get on it for a long time. Bill

10-07-2007, 09:12 PM	#3
Michael Beard VIP Member Join Date: Sep 2002 Location: Columbus, OH Posts: 4,060 Likes: 0 Liked 13 Times in 9 Posts	Re: web site needed Roughly, .001 at 110-115 mph is 1.9 inches. 2" per thou gets you fairly close. I think is was about 2.5" at 140 mph, just offhand. __________________ Michael Beard - NHRA/IHRA 3216 S/SS

10-08-2007, 02:08 PM	#4
Brister Junior Member Join Date: Jan 2007 Location: morehead city, nc Posts: 83 Likes: 0 Liked 6 Times in 3 Posts	Re: web site needed If you can't find the website this is the formula I use: Multiply the mph of the second car to pass the finish line by 63,360 (inches per mile) then divide it by 3,600,000 (thousandths per hour). You are travelling 1.76" per .001 at 100mph. 100 x 63,360 = 6,336,000 divided by 3,600,000 = 1.76 This is based on a constant speed for the last 66' thus dumping/braking probably throws the formula a little out of whack. Irregardless it's probably pretty accurate and I don't know any other way to figure it. Anybody else got any better formulas?

10-08-2007, 02:53 PM	#5
Steve Calabro Member Join Date: Jun 2007 Location: New Jersey Posts: 198 Likes: 225 Liked 43 Times in 12 Posts	Re: web site needed true win X 1.47 X speed __________________ Steve Calabro 1199 STK, SS

10-08-2007, 10:05 PM	#6
SSDA Hemi Senior Member Join Date: Nov 2005 Location: NJ Posts: 503 Likes: 130 Liked 450 Times in 77 Posts	Re: web site needed Here you go: http://www.wallaceracing.com/mov-dist.php

10-09-2007, 05:47 PM	#7
Monte Howard Member Join Date: Nov 2002 Location: Potomac,IL Posts: 277 Likes: 1 Liked 60 Times in 21 Posts	Re: web site needed Thanks guys. __________________ Monte Howard 3209 STK, 3208 SS