Pontiac Tunnelport in Hot Rod Magazine, July Issue!

Tom P · 07-08-2014, 01:42 AM

I read that in awe of the radical stuff done and the great results. Since those heads are almost a copy of my beloved Ford FE Tunnel Ports and a Pontiac engine is quite similar dimensions some of those ideas apply to me. The offset bore spacing is something i've only seen done once before by Jay Brown with his 4.5" bore 585" Ford SOHC he ran at Hot Rod's Drag Week several years ago. The squared intake ports and radical offset rockers are wild.

JEFF ESSMANN · 07-08-2014, 11:28 PM

alex they are not going to get it for the 428 but they should work for replacements on my 455 H-O

07-08-2014, 01:42 AM	#1
Tom P Senior Member Join Date: Mar 2002 Posts: 707 Likes: 30 Liked 239 Times in 94 Posts	Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue! I read that in awe of the radical stuff done and the great results. Since those heads are almost a copy of my beloved Ford FE Tunnel Ports and a Pontiac engine is quite similar dimensions some of those ideas apply to me. The offset bore spacing is something i've only seen done once before by Jay Brown with his 4.5" bore 585" Ford SOHC he ran at Hot Rod's Drag Week several years ago. The squared intake ports and radical offset rockers are wild.

07-08-2014, 11:28 PM	#2
JEFF ESSMANN Junior Member Join Date: Sep 2003 Posts: 57 Likes: 10 Liked 1 Time in 1 Post	Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue! alex they are not going to get it for the 428 but they should work for replacements on my 455 H-O __________________ Jeff Essmann 5780 ss/ja WEB SITE WITH MY RACECAR