Anyone have a shift finger for Jerico?

ROY · 08-11-2014, 12:33 PM

I just got off the phone [9:20 AM,Monday,CA.] with Scott at Jerico.He gave me the same story I heard from George,they claim ignorance! He told me the bushed opening must be out of round or I am shifting clutchless! I have ALWAYS used the clutch [McLeod Soft-Lok],the opening is round and tight,not sloppy.The first finger,3-4,lasted for at least 14 seasons,I have had the trans for 5+ years,the second one broke on the 7th pass!! I use a LONG shifter,OLD,that has NO stops,I adjust the linkage on a fully assembled DR4 trans with the top plate removed,I make sure the gears are not being over shifted! ROY.

ROY · 09-03-2014, 01:43 AM

Bobby;any progress on the new fingers? ROY.

Bobby Fazio · 09-03-2014, 08:58 AM

Have someone running one in his trans now and getting what I believe will be my last prototype this week. If all the measurements come out to what I want then we are good to go. Can't rush something like this, I wanted perfection.

Run to Rund · 09-03-2014, 11:44 AM

Great news! I am awaiting the availability of the fingers.

Ed Carpenter · 09-03-2014, 12:27 PM

I've run a jerico since '06. One thing you can COUNT on is jerico will NEVER admit to a problem with their trans. Its always the driver, the car setup, the clutch, the this the that. It a shame they flat don't care. Once you buy a trans or parts they could care less after that. Unfortunately I just had to buy another 900.00 worth of parts from them. This will be my last jerico. Zero customer service.

ROY · 09-03-2014, 12:35 PM

Bobby;not trying to rush the issue,had not heard anything so was just curious!!Sounds like it is coming along well!! ROY.

ROY · 09-30-2014, 01:51 AM

Bobby;any new information on the shift fingers?

08-11-2014, 12:33 PM	#1
ROY Junior Member Join Date: Oct 2007 Posts: 15 Likes: 0 Liked 0 Times in 0 Posts	Re: Anyone have a shift finger for Jerico? I just got off the phone [9:20 AM,Monday,CA.] with Scott at Jerico.He gave me the same story I heard from George,they claim ignorance! He told me the bushed opening must be out of round or I am shifting clutchless! I have ALWAYS used the clutch [McLeod Soft-Lok],the opening is round and tight,not sloppy.The first finger,3-4,lasted for at least 14 seasons,I have had the trans for 5+ years,the second one broke on the 7th pass!! I use a LONG shifter,OLD,that has NO stops,I adjust the linkage on a fully assembled DR4 trans with the top plate removed,I make sure the gears are not being over shifted! ROY.

09-03-2014, 01:43 AM	#2
ROY Junior Member Join Date: Oct 2007 Posts: 15 Likes: 0 Liked 0 Times in 0 Posts	Re: Anyone have a shift finger for Jerico? Bobby;any progress on the new fingers? ROY.

09-03-2014, 08:58 AM	#3
Bobby Fazio VIP Member Join Date: Nov 2009 Location: Egg Harbor Township, NJ Posts: 1,469 Likes: 1,452 Liked 4,365 Times in 501 Posts	Re: Anyone have a shift finger for Jerico? Have someone running one in his trans now and getting what I believe will be my last prototype this week. If all the measurements come out to what I want then we are good to go. Can't rush something like this, I wanted perfection. __________________ '65 Mustang SS/L & L/SA DriverInterviews.com \| App.DragInsights.com

09-03-2014, 11:44 AM	#4
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: Anyone have a shift finger for Jerico? Great news! I am awaiting the availability of the fingers.

09-03-2014, 12:27 PM	#5
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Anyone have a shift finger for Jerico? I've run a jerico since '06. One thing you can COUNT on is jerico will NEVER admit to a problem with their trans. Its always the driver, the car setup, the clutch, the this the that. It a shame they flat don't care. Once you buy a trans or parts they could care less after that. Unfortunately I just had to buy another 900.00 worth of parts from them. This will be my last jerico. Zero customer service. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

09-03-2014, 12:35 PM	#6
ROY Junior Member Join Date: Oct 2007 Posts: 15 Likes: 0 Liked 0 Times in 0 Posts	Re: Anyone have a shift finger for Jerico? Bobby;not trying to rush the issue,had not heard anything so was just curious!!Sounds like it is coming along well!! ROY.

09-30-2014, 01:51 AM	#7
ROY Junior Member Join Date: Oct 2007 Posts: 15 Likes: 0 Liked 0 Times in 0 Posts	Re: Anyone have a shift finger for Jerico? Bobby;any new information on the shift fingers?