|
|
10-10-2014, 02:37 PM
|
#6 |
|
Junior Member
Join Date: Mar 2013
Posts: 80
Likes: 12
Liked 27 Times in 6 Posts
|
Re: GM 8.5 mini spool
It may last, but it is more prone to failure because with a mini-spool, all the load from the ring gear to the axles is transmitted only through the pin, to the bore in the cast case. With a posi unit, most of this load is transmitted through the clutches, into the inside of the case.
|
|
|
|
|
Threaded Mode