intake manifold

astikhossw · 11-19-2014, 12:03 PM

Hey Bill if you want to run a 4300d carb i know were you can get a nice CA intake.

Bill Diehl · 11-19-2014, 12:26 PM

The blue thunder is supposed to be a copy, I am going to see what they say about that.

I need the standard holley pattern, I need to use my carb

FireSale · 11-19-2014, 12:56 PM

For the Bow Tie and MOPAR folks, he's talking about a BOSS 351 Holley 4bbl intake called a "Buddy Bar". It's a performance specialty part according to MustangTech.com and very hard to find.

Just say No to 4300...

Dale

Lou Jeffery · 11-19-2014, 01:32 PM

It should be NO problem to get a manifold accepted for your application. Just like the 502 crate motor gm performance manifold accepted for the 396 375 Chevrolet.

SSDiv6 · 11-19-2014, 03:42 PM

Bill,
The Blue Thunder happens is an identical copy of the D1ZX-9425-DA intake. Will not be surprised if the guys at Blue Thunder purchased the original tooling from Ford like they did for many of their other offerings.

Just submit it to NHRA for approval like many have done for other applications.

Bill Diehl · 11-19-2014, 04:13 PM

Quote:

Originally Posted by SSDiv6

Bill,
The Blue Thunder happens is an identical copy of the D1ZX-9425-DA intake. Will not be surprised if the guys at Blue Thunder purchased the original tooling from Ford like they did for many of their other offerings.

Just submit it to NHRA for approval like many have done for other applications.

I did, waiting on a response

Dave Noll · 11-21-2014, 03:26 AM

Bill,
Those are showing up all the time on E-bay. If not there, there's Perogi or other Mustang/Cougar resto sites. But yes, they're spendy.

11-19-2014, 12:03 PM	#1
astikhossw Member Join Date: Jul 2008 Location: moreno valley Ca Posts: 266 Likes: 2 Liked 20 Times in 9 Posts	Re: intake manifold Hey Bill if you want to run a 4300d carb i know were you can get a nice CA intake. __________________ 7015 E/SA Sooner Storm

11-19-2014, 12:26 PM	#2
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: intake manifold The blue thunder is supposed to be a copy, I am going to see what they say about that. I need the standard holley pattern, I need to use my carb

11-19-2014, 12:56 PM	#3
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: intake manifold For the Bow Tie and MOPAR folks, he's talking about a BOSS 351 Holley 4bbl intake called a "Buddy Bar". It's a performance specialty part according to MustangTech.com and very hard to find. Just say No to 4300... Dale

11-19-2014, 01:32 PM	#4
Lou Jeffery Junior Member Join Date: Nov 2013 Posts: 91 Likes: 0 Liked 0 Times in 0 Posts	Re: intake manifold It should be NO problem to get a manifold accepted for your application. Just like the 502 crate motor gm performance manifold accepted for the 396 375 Chevrolet.

11-19-2014, 03:42 PM	#5
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,045 Likes: 712 Liked 1,605 Times in 583 Posts	Re: intake manifold Bill, The Blue Thunder happens is an identical copy of the D1ZX-9425-DA intake. Will not be surprised if the guys at Blue Thunder purchased the original tooling from Ford like they did for many of their other offerings. Just submit it to NHRA for approval like many have done for other applications.

11-21-2014, 03:26 AM	#7
Dave Noll Senior Member Join Date: Nov 2007 Location: Div. 6, Eastern, WA Posts: 710 Likes: 2,708 Liked 240 Times in 112 Posts	Re: intake manifold Bill, Those are showing up all the time on E-bay. If not there, there's Perogi or other Mustang/Cougar resto sites. But yes, they're spendy. __________________ Dave Noll, EF/S ,?/SA 6526