Oil pan and timing cover gaskets

Dave Ribeiro · 11-26-2014, 07:06 PM

Marvin,

I use cork on one side & scraper with Ultra gray on both sides, on the other... Attach the scraper to the block first with a good thin bead , hold down over-night with oil pan bolts ...Make sure you rotate crank to be sure you have enough clearance & nothing is hitting ? Also, trim any extra Ultra gray stuff away and do the top edge of scraper and tighten down pan with another good bead of Ultra ... This is what I do on my Pontiac engines... Hope this helps...

11-26-2014, 07:06 PM	#3
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Oil pan and timing cover gaskets Marvin, I use cork on one side & scraper with Ultra gray on both sides, on the other... Attach the scraper to the block first with a good thin bead , hold down over-night with oil pan bolts ...Make sure you rotate crank to be sure you have enough clearance & nothing is hitting ? Also, trim any extra Ultra gray stuff away and do the top edge of scraper and tighten down pan with another good bead of Ultra ... This is what I do on my Pontiac engines... Hope this helps... __________________ Dave Ribeiro 1033 STK