SBF main bearings?

Mike Taylor 3601 · 01-23-2015, 10:52 AM

There is A-series bearings which are aluminum bored,didn't like them when they were introduced,but I take engines apart with them all time with 100K+ and they still look good, these are shiny bearings like come in all late model engines.

P-series is tin plated that has been around for years
H-series is high performance.
I usually use H series bearings most any thing I do street/strip,if you have a forged crank you have to use H series to clear larger radius on crank, H bearings are narrowed or chamfered to clear.

I have been using alot of King bearings last few years.
You can have good results with about any bearing,if have clearances correct,clean assembly, no oiling problems.

01-23-2015, 10:52 AM	#1
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,372 Likes: 355 Liked 308 Times in 103 Posts	Re: SBF main bearings? There is A-series bearings which are aluminum bored,didn't like them when they were introduced,but I take engines apart with them all time with 100K+ and they still look good, these are shiny bearings like come in all late model engines. P-series is tin plated that has been around for years H-series is high performance. I usually use H series bearings most any thing I do street/strip,if you have a forged crank you have to use H series to clear larger radius on crank, H bearings are narrowed or chamfered to clear. I have been using alot of King bearings last few years. You can have good results with about any bearing,if have clearances correct,clean assembly, no oiling problems.