30x9 Radial Slick For Brackets

1700camaro · 02-08-2015, 04:06 PM

Anybody have any input on the shock adjustments for the radials?

This is our shock settings for the bias ply slicks. QA1 stocker star shocks, DA on the rear & SA on the front. #1 setting being loose & #18 being stiff. Currently the rears are set at #5 for the rebound & #10 for the compression. The front is on the #1 setting.

I think I'll try the above setting to start. Then loosen the rebound 1 click at a time & tighten the compression the same way for the rear. The front may have to be tightened. Is this the correct thinking/direction to go when switching from bias to radial?

02-08-2015, 04:06 PM	#13
1700camaro Member Join Date: Mar 2010 Posts: 316 Likes: 117 Liked 226 Times in 115 Posts	Re: 30x9 Radial Slick For Brackets Anybody have any input on the shock adjustments for the radials? This is our shock settings for the bias ply slicks. QA1 stocker star shocks, DA on the rear & SA on the front. #1 setting being loose & #18 being stiff. Currently the rears are set at #5 for the rebound & #10 for the compression. The front is on the #1 setting. I think I'll try the above setting to start. Then loosen the rebound 1 click at a time & tighten the compression the same way for the rear. The front may have to be tightened. Is this the correct thinking/direction to go when switching from bias to radial?