New Eliminator proposition

[SStockDart]

Wow.....lots of good posts. Don Kennedy, I agree, stock and superstock is not broken, except for the "no horsepower" for new cars. Very simply, if NHRA is ever going to allow a new eliminator, it absolutely has to be simple to administer........Newest categories, Top Dragster, Top Sportsman.......vertually no time necessary for NHRA to regulate. Safety check the cars.....top 16 or 32 qualify....must run within ? of qualification time.
I feel strongly about 2 categories of Modified Production.....first category (double AA, BB, etc), multiple carbs (no boosters).......14 inch tire. Second category, (single A, B, etc)....single carb, 9 inch tire...Where I seem to have a difference with some posts is the size of the carb changing with the class......I believe one size carb for the single carb cars....my preference is a 600 CFM....If you want to run A/MP with 500 inches, make it run with 600 CFM....(no real opponent of a 750 carb as long as it is 750 for all single carb cars)... We don't want to make it easy for competitors to run fast, they will have to work hard on the combinations......but we have to make it easy for NHRA tech to administer.

It goes like this.....OK, you want to run single carb Modified Production......easy to make horsepower (relatively speaking) with a 300 cube engine and 600 CFM carb......you want to run A/MP, much harder to make horsepower with a 600 CFM......Your choice.....\

Absolutely needs to run like Comp with CIC......resent the CIC periodically, and start from scratch.

EFI and turbos could be added later, depending of the success of Modified Production. But needs to be easy for NHRA.

Realistic, A tear down for a stocker.....cam lift, bore, stroke, carb measurements, wheel base, overhang, pull a piston with rod for weight and compliance, intake compliance, etc..... this 2 category Modified Production.....pump the engine, fuel check, measure carb, and 5 seconds to check tire size.

Good Luck