Tubeless tire pressure

Sean Marconette · 06-07-2015, 08:20 PM

I run 15x10 with 29.5x9 bias ply but a stick car. Never been above 15 lbs unless I want to spin. OP stated bias ply. Try 13 lbs and work up from there.

Sean

J.R. Haddad · 06-07-2015, 09:16 PM

Bias ply and radials have nothing in common. Start at 20 lbs. with a 10
inch rim, and go UP from there.

GTX JOHN · 06-07-2015, 10:36 PM

Same tire and wheel size on one of our bracket cars = 16 to 17 is where we
ended up. Seemed high for bias but lower pressure really tore up sidewall.
Our car is 3300 LB. with 1.5 to 60 Ft.

06-07-2015, 08:20 PM	#1
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 798 Liked 275 Times in 76 Posts	Re: Tubeless tire pressure I run 15x10 with 29.5x9 bias ply but a stick car. Never been above 15 lbs unless I want to spin. OP stated bias ply. Try 13 lbs and work up from there. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

06-07-2015, 09:16 PM	#2
J.R. Haddad Senior Member Join Date: Jun 2012 Posts: 788 Likes: 943 Liked 1,471 Times in 308 Posts	Re: Tubeless tire pressure Bias ply and radials have nothing in common. Start at 20 lbs. with a 10 inch rim, and go UP from there.

06-07-2015, 10:36 PM	#3
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,737 Likes: 2,813 Liked 2,489 Times in 699 Posts	Re: Tubeless tire pressure Same tire and wheel size on one of our bracket cars = 16 to 17 is where we ended up. Seemed high for bias but lower pressure really tore up sidewall. Our car is 3300 LB. with 1.5 to 60 Ft. __________________ John Irving 741 Stock 741 Super Stock