Rockers for stock Eliminator 5.0 SBF

astikhossw · 06-08-2015, 03:47 PM

Did you ever check the YellaTerra rockers .

JHeath · 06-08-2015, 08:16 PM

I did, might be questionable the way they mount, price is up there, I would buy em in a heartbeat.

Slickfoot · 06-08-2015, 11:50 PM

Tony gave me a good price on PRW rockers, I get my heads back tomarrow. Than I'm going to see were I'm at with push rods and such. I still may stick with the stocker rockers. Not being adjustable means thay wont go out of adjusment EZ.
Slickfoot

Tony Corley · 06-09-2015, 06:01 PM

You can buy a nice used set of pedestal mount rockers all the time for less than $125. Being adjustable is not an issue, just makes it slightly easier to set the correct plunge height on the lifter, but at the end of the day, no performance advantage. There is, however slight, enough of an advantage to run the rollers over stock.

Slickfoot · 06-09-2015, 06:10 PM

Thanks
I haven't seen a used set ever, for $125 that would be worth it. The new prices of $400 and going higher for no HP gain, I'll put the money somewhere else. Maybe a nice anti-roll set up.
Slickfoot

Tony Corley · 06-10-2015, 06:29 PM

I just bought a set of Scorpion 1.6's last week for $100 in x/c. You need to look on sites like The Corral. Deals all of the time for mustang parts.

Tony Corley · 06-15-2015, 12:34 PM

Here is a new set of adjustable ones that just showed up on Corral for $250. Not mine, just saw and posted it here trying to help.

http://forums.corral.net/forums/wind...r-rockers.html

06-08-2015, 03:47 PM	#1
astikhossw Member Join Date: Jul 2008 Location: moreno valley Ca Posts: 266 Likes: 2 Liked 20 Times in 9 Posts	Re: Rockers for stock Eliminator 5.0 SBF Did you ever check the YellaTerra rockers . __________________ 7015 E/SA Sooner Storm

06-08-2015, 08:16 PM	#2
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 786 Likes: 2,876 Liked 370 Times in 101 Posts	Re: Rockers for stock Eliminator 5.0 SBF I did, might be questionable the way they mount, price is up there, I would buy em in a heartbeat. __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"

06-08-2015, 11:50 PM	#3
Slickfoot Junior Member Join Date: Aug 2013 Location: Lewiston NY Posts: 77 Likes: 2 Liked 2 Times in 2 Posts	Re: Rockers for stock Eliminator 5.0 SBF Tony gave me a good price on PRW rockers, I get my heads back tomarrow. Than I'm going to see were I'm at with push rods and such. I still may stick with the stocker rockers. Not being adjustable means thay wont go out of adjusment EZ. Slickfoot

06-09-2015, 06:01 PM	#4
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Re: Rockers for stock Eliminator 5.0 SBF You can buy a nice used set of pedestal mount rockers all the time for less than $125. Being adjustable is not an issue, just makes it slightly easier to set the correct plunge height on the lifter, but at the end of the day, no performance advantage. There is, however slight, enough of an advantage to run the rollers over stock.

06-09-2015, 06:10 PM	#5
Slickfoot Junior Member Join Date: Aug 2013 Location: Lewiston NY Posts: 77 Likes: 2 Liked 2 Times in 2 Posts	Re: Rockers for stock Eliminator 5.0 SBF Thanks I haven't seen a used set ever, for $125 that would be worth it. The new prices of $400 and going higher for no HP gain, I'll put the money somewhere else. Maybe a nice anti-roll set up. Slickfoot

06-10-2015, 06:29 PM	#6
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Re: Rockers for stock Eliminator 5.0 SBF I just bought a set of Scorpion 1.6's last week for $100 in x/c. You need to look on sites like The Corral. Deals all of the time for mustang parts.

06-15-2015, 12:34 PM	#7
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Re: Rockers for stock Eliminator 5.0 SBF Here is a new set of adjustable ones that just showed up on Corral for $250. Not mine, just saw and posted it here trying to help. http://forums.corral.net/forums/wind...r-rockers.html