|
|
06-20-2015, 02:46 PM
|
#7 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,429
Likes: 564
Liked 336 Times in 183 Posts
|
Re: Bellhousing alignment issue
John--- look at McMaster -Carr company they sell dowel pins up to 3/4" in diameter and 4 inches long pretty inexpensive too about $3-5 each plus shipping --- when you get them have any competent machinist turn them on a lathe to the diameter you need--- problem solved--- FED 387
|
|
|
|
|
Threaded Mode