|
|
|
|
08-11-2015, 10:40 PM
|
#1 |
|
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 569
Likes: 311
Liked 285 Times in 87 Posts
|
Re: carb air entry pan for the Super 10
Larry…Classic Industries Part number C695, should keep you out of trouble. MB.
|
|
|
|
08-12-2015, 04:09 AM
|
#2 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: carb air entry pan for the Super 10
Maurice,
Thanks, I need a non trouble situation 
__________________
Larry Woodfin 471W |
|
|
|
|
08-12-2015, 08:32 AM
|
#3 |
|
Member
Join Date: Nov 2001
Location: Marion,In.
Posts: 267
Likes: 60
Liked 110 Times in 29 Posts
|
Re: carb air entry pan for the Super 10
Larry,
Not sure exactly what you are wanting but if you need an air cleaner base, then check out Speedway Motors' #91011062-2. At only $14.99 you can't go wrong. This is what I used to recommend to my carb customers when they asked about air cleaner bases. They also offer it with a top if you want to run a filter, #91011000. It comes with your choice if spacer 1/2, 1, or 2 inch and a stud. Hope this helps. Regards, Danny |
|
|
|
|
08-12-2015, 09:12 AM
|
#4 |
|
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
Re: carb air entry pan for the Super 10
Legal? http://www.r2cperformance.com/produc...?ProductId=264
http://www.speedwaymotors.com/R2C-Pe...-14,70686.html
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 08-12-2015 at 09:22 AM. |
|
|
|
|
08-12-2015, 09:54 AM
|
#5 |
|
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,180
Likes: 1,074
Liked 799 Times in 236 Posts
|
Re: carb air entry pan for the Super 10
I think tech. would consider that base the same as they do a K&N Stub Stack. -Al
__________________
"That'll never work....." |
|
|
|
|
08-12-2015, 09:59 AM
|
#6 | |
|
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
Re: carb air entry pan for the Super 10
Quote:
How about this version? These folks are supposedly working on Quadrajet parts as well. 
__________________
Rich Taylor I/SA - 321 |
|
|
|
|
|
08-12-2015, 11:03 AM
|
#7 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: carb air entry pan for the Super 10
Danny Ashley,
Thanks, I still remember the very good Q-jet you did for me about 8 - 9 years ago. That carb worked great on our 350/255 F/SA Nova. And about the air pan base, simply looking at something to potentially smooth out air flow. I will check your suggested links. The combination I have now is SS 327/300/293 with Quick Fuel SS585 replacement carb.
__________________
Larry Woodfin 471W |
|
|
|
 |
|
|
Hybrid Mode
