Radial tire "wobble" with the Super 10

Mike Pearson · 09-21-2015, 06:05 AM

Drop the tire pressure to what you were running in the bias ply tires. Then work your way back up until you find a sweet spot. I had the same issue and this is the method I used. I have never been able to use more than about 14 lbs in my tires and have consistency. I run Hoosier and they seem to be more forgiving than the M/T tire. The M/T seemed to be just a bit faster but did not last very long. As Angelo said check all of your shock settings. Certain tracks will act differently if they have bumps.

09-21-2015, 06:05 AM	#3
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,450 Likes: 615 Liked 1,931 Times in 580 Posts	Re: Radial tire "wobble" with the Super 10 Drop the tire pressure to what you were running in the bias ply tires. Then work your way back up until you find a sweet spot. I had the same issue and this is the method I used. I have never been able to use more than about 14 lbs in my tires and have consistency. I run Hoosier and they seem to be more forgiving than the M/T tire. The M/T seemed to be just a bit faster but did not last very long. As Angelo said check all of your shock settings. Certain tracks will act differently if they have bumps. __________________ Mike Pearson 2485 SS