|
11-12-2015, 09:12 AM | #21 |
Member
Join Date: Dec 2013
Posts: 311
Likes: 2
Liked 9 Times in 8 Posts
|
Re: Boss Mustang stocker
pushrod clearance....they start out as little round holes
__________________
__________________ Bill Diehl B200 C/D STK |
11-12-2015, 10:51 AM | #22 |
Member
Join Date: Dec 2013
Posts: 311
Likes: 2
Liked 9 Times in 8 Posts
|
Re: Boss Mustang stocker
My bender wont bend this piece, I had to buy one....083 4130
__________________
__________________ Bill Diehl B200 C/D STK |
11-12-2015, 11:17 AM | #23 |
Member
Join Date: Dec 2013
Posts: 311
Likes: 2
Liked 9 Times in 8 Posts
|
Re: Boss Mustang stocker
I need to get some clarifications on the roll cage, I got an approval for a 25.5C spec floor construction ect, but I would like to "attach" the rest of the cage to the a pillar, b pillar, door post ect....but then it makes a hard time with the plastic trim going back in. (that the rules state you got to have)
Just putting tubing inside a shell is one thing but there is still a lot of heavy unibody structure surrounding it going for the ride, just seems better to be all "one piece" since this is not a car with a plastic or carbon body around it the firewall, front drops to the front frame structure that is new for 2016 I completely agree with
__________________
__________________ Bill Diehl B200 C/D STK |
11-12-2015, 01:03 PM | #24 | |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 127 Posts
|
Re: Boss Mustang stocker
Quote:
Dale
__________________
Dale Shearon 68 Mustang 6394 |
|
11-12-2015, 02:10 PM | #25 | |
Member
Join Date: Dec 2013
Posts: 311
Likes: 2
Liked 9 Times in 8 Posts
|
Re: Boss Mustang stocker
Quote:
__________________
__________________ Bill Diehl B200 C/D STK |
|
11-12-2015, 04:47 PM | #26 | |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 127 Posts
|
Re: Boss Mustang stocker
Quote:
Dale
__________________
Dale Shearon 68 Mustang 6394 |
|
11-12-2015, 05:08 PM | #27 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 699
Likes: 2,445
Liked 224 Times in 106 Posts
|
Re: Boss Mustang stocker
Ummmmmm, that's an aluminum head in the pics you posted. You running SS ?
__________________
Dave Noll, E/FS ,?/SA 6526 |
11-12-2015, 05:24 PM | #28 |
Member
Join Date: Jul 2008
Location: moreno valley Ca
Posts: 264
Likes: 2
Liked 19 Times in 8 Posts
|
Re: Boss Mustang stocker
I think this is what it may look like it was posted on another sight as stock Dave.
__________________
7015 E/SA Sooner Storm Last edited by astikhossw; 07-04-2017 at 02:31 PM. |
11-12-2015, 05:47 PM | #29 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 699
Likes: 2,445
Liked 224 Times in 106 Posts
|
Re: Boss Mustang stocker
That looks nice, thanks Sooner.
__________________
Dave Noll, E/FS ,?/SA 6526 |
11-12-2015, 06:51 PM | #30 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 127 Posts
|
Re: Boss Mustang stocker
I think wer'e looking at a BOSS 351 '71 Mustang. Those might be Edelbrock heads part number 61607. They are listed as legal for both Stock and SS. They ship as bare heads and the buyer has to have all the machining done. That seems to be the case here.
Dale
__________________
Dale Shearon 68 Mustang 6394 |
|
|