Tips on filling Exhaust Crossover

R. Thorne · 12-15-2015, 10:55 AM

I ended up using the cotronics 940ht high temperature (3000 degrees). I don't have access to a torch and on the performance years web site a number of people had good results with it. It was a little pricey (about $100 for the quart size), but I have done 2 sets of Pontiac heads and could easily do another set or two. After two years of running, the adhesive has held up fine. Ron.

12-15-2015, 10:55 AM	#5
R. Thorne Member Join Date: May 2009 Posts: 184 Likes: 75 Liked 106 Times in 35 Posts	Re: Tips on filling Exhaust Crossover I ended up using the cotronics 940ht high temperature (3000 degrees). I don't have access to a torch and on the performance years web site a number of people had good results with it. It was a little pricey (about $100 for the quart size), but I have done 2 sets of Pontiac heads and could easily do another set or two. After two years of running, the adhesive has held up fine. Ron.