|
|
|
|
12-21-2015, 03:08 PM
|
#1 |
|
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 909
Likes: 70
Liked 239 Times in 114 Posts
|
Re: TH350 Strength
Another good upgrade is to install a 4L65 lo roller clutch assembly/support. This part is made of nodular iron, instead of a normal 350 which was gray iron , and the rollers were slightly wider. It will handle much more torque than a 350 roller clutch.
|
|
|
|
12-21-2015, 07:43 PM
|
#2 |
|
VIP Member
Join Date: Sep 2002
Location: Williamsburg, Va.---USA
Posts: 1,827
Likes: 1,612
Liked 56 Times in 27 Posts
|
Re: TH350 Strength
Make sure you talk to Jack Sepanek, he uses a torque strap on most of the T-350 & M-200's ... They are adjustable & work very well .... The other
thing to check into is JW bell-housing, used by lots of Stk / S/S racer's !!!! Jack, can also help you with those ( JW bell-housings ) Good Luck with your project in 2016...
__________________
Dave Ribeiro 1033 STK |
|
|
|
|
12-25-2015, 02:14 PM
|
#3 |
|
Member
Join Date: Dec 2001
Location: tomsriver nj
Posts: 480
Likes: 74
Liked 221 Times in 87 Posts
|
Re: TH350 Strength
Daves wright the ultra bell can be used & I save one trans case which had alot of work im it already . Jack did say the bell it one of the week points .
|
|
|
|
| Liked |
|
12-25-2015, 11:49 PM
|
#4 | |
|
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,486
Likes: 66
Liked 704 Times in 281 Posts
|
Re: TH350 Strength
Quote:
|
|
|
|
|
|
12-26-2015, 12:25 PM
|
#5 |
|
Member
Join Date: Mar 2007
Location: Grosse Ile Mi.
Posts: 316
Likes: 84
Liked 13 Times in 7 Posts
|
Re: TH350 Strength
Send me your e-mail and I'll send you a picture of mine.
My Metric 200 was done by Defiance Transmission in Ohio. John |
|
|
|
 |
|
|
Hybrid Mode
