Holley dis ignition programming cable

Rich Biebel · 12-06-2007, 01:38 PM

Tom, It took me 3 tries to get one Holley Annihilator to work in my '98 dragster. These were all new units and had various problems including the no tach signal mentioned. I have a sportsman model on the shelf. It worked for about 2-3 seasons. I developed engine miss problems and replaced the entire ignition system. The Holley may NOT have been the problem as I found a damaged crank trigger pickup during the changeover. Dealing with Holley was not very productive.....I even had a 2 box Pro Model sent to me from their repair dept. No cables, no paperwork, nothing. I sent them a 1 box Sportsman model. I will say I loved it when it did work. No chips and the handheld programmer was real easy to use. I had it velcro'd in my ****pit and could change the setup real easy anytime. Rich

vic guilmino · 12-07-2007, 06:20 PM

i have one if you need it but i am going to try to use the holley in the ss car so i will need it back
vic
suevic@verizon.net

Tom Goldman · 12-07-2007, 06:28 PM

Vic, I'd greatly appreciate it if I could borrow it for about 1 day. I need to make a change on one that cannot be done with the quickshot ........... I will send you a PM with contact info. ........ Thanks, Tom

12-06-2007, 01:38 PM	#1
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,320 Likes: 25 Liked 557 Times in 217 Posts	Re: Holley dis ignition programming cable Tom, It took me 3 tries to get one Holley Annihilator to work in my '98 dragster. These were all new units and had various problems including the no tach signal mentioned. I have a sportsman model on the shelf. It worked for about 2-3 seasons. I developed engine miss problems and replaced the entire ignition system. The Holley may NOT have been the problem as I found a damaged crank trigger pickup during the changeover. Dealing with Holley was not very productive.....I even had a 2 box Pro Model sent to me from their repair dept. No cables, no paperwork, nothing. I sent them a 1 box Sportsman model. I will say I loved it when it did work. No chips and the handheld programmer was real easy to use. I had it velcro'd in my ****pit and could change the setup real easy anytime. Rich __________________ Rich Biebel S/C 1479 Stock 147R

12-07-2007, 06:20 PM	#2
vic guilmino Senior Member Join Date: Dec 2001 Location: wv Posts: 884 Likes: 42 Liked 56 Times in 21 Posts	Re: Holley dis ignition programming cable i have one if you need it but i am going to try to use the holley in the ss car so i will need it back vic suevic@verizon.net __________________ Vic Guilmino 1129 STK

12-07-2007, 06:28 PM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,478 Likes: 894 Liked 886 Times in 238 Posts	Re: Holley dis ignition programming cable Vic, I'd greatly appreciate it if I could borrow it for about 1 day. I need to make a change on one that cannot be done with the quickshot ........... I will send you a PM with contact info. ........ Thanks, Tom __________________ Tom Goldman 1500 SG , 1506 STK