Within Stock rules???

[gbur]

Originally Posted by novassdude

From the article
“so we milled down the intake flange surface to shorten up the length of the port just slightly. This gives us some extra room to touch up the short-turn radius, bowl, and valve job area and increase the cross-section a bit without exceeding the cc limit,”

From the NHRA Rule book
“Must be correct casting number for year and horsepower claimed, per NHRA Technical Bulletins or NHRA accepted. Porting, polishing, welding, epoxying and acid-porting prohibited.”

Based on this how is this motor legal?

exactly