68 chevelle suspention - Page 4

Mark Yacavone · 05-07-2016, 07:47 PM

No? Here it is again:

Quote:

Originally Posted by 1320racer

This^^^

completely bolt in and replaces every part of the factory suspension.

Went a best of 1.28 60 foot launched off the footbrake at 3880 lbs. 9 years ago.

HP HUNTER · 05-07-2016, 08:33 PM

Quote:

Originally Posted by 1320racer

a street car doesn't mean it's a daily driver and the only books that counts here is the OP's.

No confusion about it, Abbezia's former chevelle didn't 60 foot 1.28 and it didn't weigh 3880 lbs. but my Chevelle did!

1.288 @ 3880 to be exact, Ed, just how much do think a 71 LS6 has to weigh in B/SA? And BTW many many years ago it also went 10.00 in B/SA. As far as my Chevelle and Johns go your not going to want to talk about that. Both cars that would leave on your Chevelle like you were going backwards, both stock suspension, both GM production oval ports.

1320racer · 05-07-2016, 09:34 PM

Again, Abazzia's former chevelle never went 1.28 in 60 foot nor did it weigh 3880 lbs.

HP HUNTER · 05-07-2016, 09:49 PM

Quote:

Originally Posted by 1320racer

Again, Abazzia's former chevelle never went 1.28 in 60 foot nor did it weigh 3880 lbs.

Ed, do you see the designation B/SA on the rear side window of Joeys 71 Chevelle?

Ed, would you agree Joey ran his Chevelle as a 1971 LS6 454 combination?

1320racer · 05-07-2016, 09:51 PM

that car hasn't been "Joeys" in nearly 10 years and no one cares what that ILLEGAL car ran when he owned, least of which is the op that asked about the best suspension for his '68 Chevelle. What it didn't do is 60 foot 1.28 nor did it weigh 3880 lbs. FACT!!

Meanwhile, you've never met abbazia, never seen the car in person, don't have a clue to where it is now. All of which I have and do!

HP HUNTER · 05-07-2016, 10:05 PM

Quote:

Originally Posted by 1320racer

that car hasn't been "Joeys" in nearly 10 years and no one cares what that ILLEGAL car ran when he owned, least of which is the op that asked about the best suspension for his '68 Chevelle. What it didn't do is 60 foot 1.28 nor did it weigh 3880 lbs. FACT!!

Meanwhile, you've never met abbazia, never seen the car in person, don't have a clue to where it is now. All of which I have and do!

Ed, again I know I have to take it slow with you........

Ed, do you see the designation B/SA on the rear side window of Joeys 71 Chevelle?

Ed, would you agree Joey ran his Chevelle as a 1971 LS6 454
combination?

"Meanwhile, you've never met abbazia"

Are you sure?

435 NHRA HP X 8.50 = 3697.5 + 170 = 3867.5 B/SA now you all know where Ed arrived @ 3880 and 1.28 60 foots, mesmerized by Joe Abbazia's 1971 B/SA LS6 Chevelle.
__________________
Do the work.....get the results.

Bernhard · 06-05-2016, 11:23 PM

Last time I checked Alf's suspension is not for street use.
His track record for building cars that work speaks for itself.

larrylomascolo · 06-12-2016, 01:08 PM

I own a 69 chevelle bracket car that sits these days,i used the right rear air bag ,it hooked o k,these days i see anti roll bars and adj control arms,,,If were you go look at Charles Sousa black 69,dont know whats under his hot rod but it leaves strait up 3ft wheels up,I/SA car,

05-07-2016, 09:34 PM	#33
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 758 Times in 379 Posts	Re: 68 chevelle suspention Again, Abazzia's former chevelle never went 1.28 in 60 foot nor did it weigh 3880 lbs.

05-07-2016, 09:51 PM	#35
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 758 Times in 379 Posts	Re: 68 chevelle suspention that car hasn't been "Joeys" in nearly 10 years and no one cares what that ILLEGAL car ran when he owned, least of which is the op that asked about the best suspension for his '68 Chevelle. What it didn't do is 60 foot 1.28 nor did it weigh 3880 lbs. FACT!! Meanwhile, you've never met abbazia, never seen the car in person, don't have a clue to where it is now. All of which I have and do! Last edited by 1320racer; 05-07-2016 at 10:00 PM.

06-05-2016, 11:23 PM	#37
Bernhard Junior Member Join Date: Jan 2012 Posts: 30 Likes: 0 Liked 1 Time in 1 Post	Re: 68 chevelle suspention Last time I checked Alf's suspension is not for street use. His track record for building cars that work speaks for itself.

06-12-2016, 01:08 PM	#38
larrylomascolo Member Join Date: Nov 2008 Location: Ontario,canada Posts: 440 Likes: 70 Liked 66 Times in 29 Posts	Re: 68 chevelle suspention I own a 69 chevelle bracket car that sits these days,i used the right rear air bag ,it hooked o k,these days i see anti roll bars and adj control arms,,,If were you go look at Charles Sousa black 69,dont know whats under his hot rod but it leaves strait up 3ft wheels up,I/SA car,