Original hemi dart information

[Liteweight]

Originally Posted by rhinodaert

So I am assembling my Hemi to mock it up in my Hemi Dart and ran into a couple of issues. I have a 66 block and the correct aluminum water pump housing and the crank that came with it and it has the thick dampner. I need to know what diameter and height the crank and water pump pulley's are. I have two different crank pulley's and an aftermarket water pump pulley from Megaparts that does not come close to the water pump bolts. I do not have a timing gear or slinger on the crank so like I said I am just mocking it up so I can adjust the dampner to line-up with the alternator pulley. I believe the correct water pump pulley needs to be close to the water pump bolts, but not sure exactly what diameter and height the real on is.

Hey Jim

I have all original 1968 Super Stock Hemi Deep Groove pulleys and alternator brackets for my car. That's the good part..... the bad part is I can't get at them right now. Car & engine is stuck in the back 40 of my shop. I'll get it out later in the year & get all the pics, & measurments you need.

Hey you mind sending me some pics of that water pump you have with casting numbers etc.

liteweight