Tube bars out to front frame on a mopar?

SSGT Mustang · 07-14-2016, 07:45 PM

"FIREWALL
"Alterations prohibited unless expressly permitted in this section. Firewall coverings prohibited.Where heater/air conditioning units have been removed, area must be covered with minimum .024-inch steel or .032- inch aluminum, including rear hood seal/flange, as on GM A-body. Minor firewall modifications permitted to C5 and C6 Corvettes for transmission installation. Roll cage tubing may run across top or side of inner fender well/strut tower and attach to frame horn. "

The last sentence has never been made clear (at least not to my knowledge). Does it apply to the corvettes or all stocker?

07-14-2016, 07:45 PM	#11
SSGT Mustang Member Join Date: Mar 2005 Location: Jersey Posts: 359 Likes: 35 Liked 204 Times in 54 Posts	Re: Tube bars out to front frame on a mopar? "FIREWALL "Alterations prohibited unless expressly permitted in this section. Firewall coverings prohibited.Where heater/air conditioning units have been removed, area must be covered with minimum .024-inch steel or .032- inch aluminum, including rear hood seal/flange, as on GM A-body. Minor firewall modifications permitted to C5 and C6 Corvettes for transmission installation. Roll cage tubing may run across top or side of inner fender well/strut tower and attach to frame horn. " The last sentence has never been made clear (at least not to my knowledge). Does it apply to the corvettes or all stocker?