Rear shock movement

ironside68 · 09-05-2016, 09:59 PM

I would tighten them to full stiff on ext, and 3-4 from full soft on compression and start there. Fwiw I've had Strange DA's on my car and had stiffer valving put in about the 3 or 4th time I ran them because I was always at full stiff on ext and still extended too fast.

The front looks to move decent and transfer, if it's a good hooking track I'd start with the rear changes first and compare videos.

09-05-2016, 09:59 PM	#5
ironside68 Junior Member Join Date: Oct 2010 Posts: 49 Likes: 10 Liked 19 Times in 6 Posts	Re: Rear shock movement I would tighten them to full stiff on ext, and 3-4 from full soft on compression and start there. Fwiw I've had Strange DA's on my car and had stiffer valving put in about the 3 or 4th time I ran them because I was always at full stiff on ext and still extended too fast. The front looks to move decent and transfer, if it's a good hooking track I'd start with the rear changes first and compare videos.