|
|
01-01-2017, 02:15 PM
|
#10 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,113
Likes: 1,571
Liked 1,827 Times in 414 Posts
|
Re: LT 1 350 valve to piston clearance
No, it is not legal to cut the valve reliefs on pistons in NHRA Stock Eliminator.
I would probably consider 0.060" piston to valve clearance on the exhaust to be the minimum safe clearance, if it was properly checked to begin with, and you have very good valvetrain control.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
Threaded Mode