Important if you run D-H/S or SA

SStockDart · 02-09-2017, 09:49 PM

Quote:

Originally Posted by Mark Yacavone

Hi Erik ,
Might want to be careful.
Billy might turn that question right back at you .
LOL

Maybe the question should be "how many wicked fast engines have you built lately"?

Mark Yacavone · 02-09-2017, 10:01 PM

Quote:

Originally Posted by SStockDart

Maybe the question should be "how many wicked fast engines have you built lately"?

Gary , I don't speak for Billy .
Anyone who knows him, realizes that's not necessary.
However, I'd guess he'd reply.."As many as I wanted to..Why do you ask ?"

SStockDart · 02-09-2017, 10:26 PM

Quote:

Originally Posted by Mark Yacavone

Gary , I don't speak for Billy .
Anyone who knows him, realizes that's not necessary.
However, I'd guess he'd reply.."As many as I wanted to..Why do you ask ?"

Just trying be be entertained..lol.....I know that Erik builds some nice stuff.
I've never met Billy. If I did, I don't recall. I'm sure he knows what he is talking about. No offense intended towards anyone. And no, I've never run a 340......383 and 440's only. I'll sit down and shut up.

jmcarter · 02-10-2017, 09:38 AM

Love Mike Delahanty's pics from the "Live from.." thread with three underhood shots including a small towel over the manifold numbers. Looks like a good approach to me...

Michael Beard · 02-10-2017, 10:21 AM

How is 'who built what, who is how fast, and who runs what combo' in any way relevant to the issue at hand?

Did the LD340 come on the 340's in question? Answer: No.

End of story.

Gordie Kissner · 02-10-2017, 01:19 PM

Quote:

Originally Posted by Michael Beard

How is 'who built what, who is how fast, and who runs what combo' in any way relevant to the issue at hand?

Did the LD340 come on the 340's in question? Answer: No.

End of story.

Oh, but those Edelbrock heads and roller rockers without Chrysler part #'s did come on 340's?? I love purity as much as the next stock eliminator racer but that ship powered by a blown hemi with a powerglide and a 9" sailed long ago!

Mark Yacavone · 02-10-2017, 02:20 PM

Quote:

Originally Posted by Gordie Kissner

Oh, but those Edelbrock heads and roller rockers without Chrysler part #'s did come on 340's?? I love purity as much as the next stock eliminator racer but that ship powered by a blown hemi with a powerglide and a 9" sailed long ago!

Gordie, Valid response.
So , the obvious answer is...JUST STOP the changes, NHRA

We still don't know why they saw fit to add a 50 year old Edelbrock manifold to a specific combo, nor who asked for it , or why.
Scarcity of original parts is no excuse.
Older cars have been becoming obsolete since this all started.
Try building a 50 Olds, starting today.

Jacko, Anyone who ever thought about building and/or racing in D-H/S has a stake in this, or as Billy said, anyone who has to qualify against them.

JUST STOP, NHRA

Signman · 02-10-2017, 04:59 PM

Quote:

Originally Posted by Gordie Kissner

Oh, but those Edelbrock heads and roller rockers without Chrysler part #'s did come on 340's?? I love purity as much as the next stock eliminator racer but that ship powered by a blown hemi with a powerglide and a 9" sailed long ago!

With all do respect but MOPAR has had advantages over other makes for years.

Specific to the 340 they came with stamped steel shaft rockers the Crane aftermarket rocker has been legal for a loooong time. Way way better than stud mount rockers with or without the Crane part.
What is the roller rocker upgrade for the 340? Jesel?

If the cast iron and aluminum manifolds flow the same out of the box are the wet flow characterisitics the same?
Aluminum is a lot easier and cheaper for undercover work.

Michael Beard · 02-10-2017, 08:24 PM

Quote:

Originally Posted by Gordie Kissner

Oh, but those Edelbrock heads and roller rockers without Chrysler part #'s did come on 340's?? I love purity as much as the next stock eliminator racer but that ship powered by a blown hemi with a powerglide and a 9" sailed long ago!

I have not defended those things, either.

So what is the point of Stock Eliminator? You can't even call it "Factory-Appearing Eliminator" anymore. It's a farce. Apparently people are content to fiddle on the deck. Sad.

jmantle · 02-11-2017, 01:54 PM

Did the LD340 come on the 340's in question? Answer: No.

End of story.[/QUOTE]

I think this tells the whole story.

Jim Mantle V/SA 6632

02-10-2017, 09:38 AM	#4
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,302 Likes: 2,400 Liked 3,205 Times in 977 Posts	Re: Important if you run D-H/S or SA Love Mike Delahanty's pics from the "Live from.." thread with three underhood shots including a small towel over the manifold numbers. Looks like a good approach to me... __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

02-10-2017, 10:21 AM	#5
Michael Beard VIP Member Join Date: Sep 2002 Location: Columbus, OH Posts: 4,060 Likes: 0 Liked 13 Times in 9 Posts	Re: Important if you run D-H/S or SA How is 'who built what, who is how fast, and who runs what combo' in any way relevant to the issue at hand? Did the LD340 come on the 340's in question? Answer: No. End of story. __________________ Michael Beard - NHRA/IHRA 3216 S/SS

02-11-2017, 01:54 PM	#10
jmantle Member Join Date: Feb 2008 Location: Black Creek, BC Canada Posts: 331 Likes: 80 Liked 172 Times in 81 Posts	Re: Important if you run D-H/S or SA Did the LD340 come on the 340's in question? Answer: No. End of story.[/QUOTE] I think this tells the whole story. Jim Mantle V/SA 6632