Metric 200 Locking Dipstick

MikeMoller · 03-03-2017, 09:38 AM

Lokar. For the top mount I made a bracket with two holes and bolts thru the holes and the heads welded to it, mounted it to the firewall from the inside and pop riveted it from the out side with one rivet. Now you have two studs sticking out and you can fasten the top. Makes it easy to loosen the top when dropping the trans and then you have easier access to remove the tube and put in the plug, and same when installing the trans.

03-03-2017, 09:38 AM	#1
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 637 Likes: 27 Liked 254 Times in 78 Posts	Re: Metric 200 Locking Dipstick Lokar. For the top mount I made a bracket with two holes and bolts thru the holes and the heads welded to it, mounted it to the firewall from the inside and pop riveted it from the out side with one rivet. Now you have two studs sticking out and you can fasten the top. Makes it easy to loosen the top when dropping the trans and then you have easier access to remove the tube and put in the plug, and same when installing the trans. __________________ Mike Moller NHRA 203 Q-R-T/SA Last edited by MikeMoller; 03-03-2017 at 09:44 AM.