|
|
|
|
03-03-2017, 01:27 PM
|
#1 |
|
VIP Member
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,676
Likes: 3,373
Liked 1,814 Times in 425 Posts
|
Re: Metric 200 Locking Dipstick
Get a dipstick out of a late model car. Measure and cut length
__________________
james perrone 1290 STK |
|
|
|
03-05-2017, 11:58 AM
|
#2 |
|
Member
Join Date: May 2014
Location: E TN
Posts: 473
Likes: 16
Liked 133 Times in 76 Posts
|
Re: Metric 200 Locking Dipstick
Lokar?? $134 for a dipstick?? No wonder it's expensive to race!
As someone else said go to a junkyard and get a stick from a late model RWD GM vehicle. Use your original dipstick and ck fluid level. Cut new dipstick if necessary to length and mark accordingly to match reading. Spend the $128 you saved on enrty fees. |
|
|
|
|
03-05-2017, 03:02 PM
|
#3 |
|
Member
Join Date: Dec 2001
Location: tomsriver nj
Posts: 477
Likes: 74
Liked 213 Times in 85 Posts
|
Re: Metric 200 Locking Dipstick
The TH350 is not the same length ?
|
|
|
|
|
03-05-2017, 05:26 PM
|
#4 |
|
VIP Member
Join Date: Jun 2006
Posts: 3,419
Likes: 525
Liked 332 Times in 180 Posts
|
Re: Metric 200 Locking Dipstick
Get a lock-in GM stick and cut it to whatever length you need or cut the 200 stick off and weld it to a GM locking handle
Last edited by FED 387; 03-05-2017 at 05:27 PM. Reason: Spelling |
|
|
|
|
03-06-2017, 09:52 AM
|
#5 |
|
Member
Join Date: Oct 2005
Location: N.S. CANADA
Posts: 498
Likes: 160
Liked 68 Times in 41 Posts
|
Re: Metric 200 Locking Dipstick
I used a GM locking dip stick.cut it off 3" from the top and keep a stock one in the trailer.
__________________
1231 FS/D Drag Pak 1231 E/SA 71 Demon Kelly MacKay |
|
|
|
|
03-07-2017, 08:56 AM
|
#6 |
|
Senior Member
Join Date: Apr 2004
Posts: 570
Likes: 2
Liked 408 Times in 115 Posts
|
Re: Metric 200 Locking Dipstick
That's why that Dodge is fast, GM parts in it LOL
|
|
|
|
 |
|
|
Hybrid Mode
