Intake gasket sealant

Rich Biebel · 08-28-2017, 03:59 PM

Cometic intake gaskets are by far the best...and they make them in a lot of different thicknesses........

Call them and talk to a Tech person. They have templates for most heads.

I have Oval Port Brodix heads and their gaskets fit perfect and don't leak or deteriorate.....

I use an .090" thick gasket and they make them for me direct...no middle man...

I don't have their phone number handy....but their easy to find....Google

Tom Meyer · 08-28-2017, 07:13 PM

1245 Felpro 1/8 thick trim to fit. Tom

Ed McLawhorn Jr. · 08-28-2017, 07:39 PM

ALL: thanks for the suggestions. Planning to install intake this weekend....too much going on during the "work week".

Ed
SS 2266

Ed Carpenter · 08-29-2017, 09:24 AM

Ed we also use right stuff for the front and rear china wall.

340Cuda · 08-29-2017, 09:48 AM

Quote:

Originally Posted by Ed Carpenter

Ed we also use right stuff for the front and rear china wall.

There seems to be several "flavors" of The Right Stuff by Permatex. Which is the best one for our use? Talking about intake end rails, valley covers, oil pans etc?

I would want something that can be several times until empty without clogging up.

Thanks,
Bill

08-28-2017, 03:59 PM	#1
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,315 Likes: 25 Liked 544 Times in 213 Posts	Re: Intake gasket sealant Cometic intake gaskets are by far the best...and they make them in a lot of different thicknesses........ Call them and talk to a Tech person. They have templates for most heads. I have Oval Port Brodix heads and their gaskets fit perfect and don't leak or deteriorate..... I use an .090" thick gasket and they make them for me direct...no middle man... I don't have their phone number handy....but their easy to find....Google __________________ Rich Biebel S/C 1479 Stock 147R

08-28-2017, 07:13 PM	#2
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 354 Times in 120 Posts	Re: Intake gasket sealant 1245 Felpro 1/8 thick trim to fit. Tom __________________ Tom Meyer 5240 SS Stock ???

08-28-2017, 07:39 PM	#3
Ed McLawhorn Jr. Member Join Date: Nov 2008 Posts: 306 Likes: 3 Liked 19 Times in 17 Posts	Re: Intake gasket sealant ALL: thanks for the suggestions. Planning to install intake this weekend....too much going on during the "work week". Ed SS 2266

08-29-2017, 09:24 AM	#4
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Intake gasket sealant Ed we also use right stuff for the front and rear china wall. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development