|
|
|
|
11-03-2017, 10:49 AM
|
#1 |
|
VIP Member
Join Date: Jan 2007
Posts: 1,044
Likes: 1,094
Liked 485 Times in 160 Posts
|
Re: axle bearing leak ?
I had problems getting a replacement O ring in the exact same size. So after choosing the closest one we applied "The Right Stuff" from Permatex and all was good. (Strange axles in an OE housing with disc brake setup.)
|
|
|
|
11-03-2017, 11:10 AM
|
#2 |
|
Member
Join Date: Jan 2007
Location: maysville
Posts: 128
Likes: 17
Liked 61 Times in 19 Posts
|
Re: axle bearing leak ?
An mechanic from the old days told me to use wheel bearing grease around the o/ring and bearing also put the grease on the flange and c/clip eliminator gasket tighten it up and it will never leak unless the vent is clogged . So far I never had another leak !
__________________
Brett McFarland A/S |
|
|
|
|
11-05-2017, 01:05 PM
|
#3 |
|
Member
Join Date: Dec 2009
Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66
Posts: 316
Likes: 0
Liked 20 Times in 15 Posts
|
Re: axle bearing leak ?
Funny how the mind forgets and then is caused to bring back info. I do remember using heavy old style bearing grease, [like for front wheel bearings]
I did check the vent [pipe type with a loose cap]. it is OK. in this small town, I will bet 'O' rings will be next to impossible to find, should I need one. thanks all for the replys. Rod in AZ |
|
|
|
 |
|
|
Hybrid Mode
