Header coatings

[jmcarter]

Originally Posted by Bobby Butler

M&R great people an do good coating ,have had a few sets coated by by Mike

Mike indeed does a great job. He’s done work for me and I was very satisfied.

[Lee Jordan (3223) A/S]

Originally Posted by Crisco

William, give the guys at M&R 865-933-1478. They have a quality product, will stand behind their product and are racers. They are a small company and do not take credit cards (the last time I used them at least) and they will ask you to mail a check after they are finished with them.

That says a lot right there. Send the check after they are finished! Sounds outstanding to me...

[mrperf]

We do accept credit cards and have for many years. thanks Mike

[Crisco]

Originally Posted by mrperf

We do accept credit cards and have for many years. thanks Mike

Mike, that is good to know. But when I sent in a couple sets, I offered to pay with CC and ya'll told me to just mail a check..LOL

Keep up the good work.

[Greg West]

For those of you that had headers coated by NitroPlate, what is the proper breakin procedure? I had a set coated by NitroPlate some time ago and I am just getting ready to use them. Also,is there a product I should use to wipe them down with before starting the engine?

Thank you.

[Crisco]

Originally Posted by Greg West

For those of you that had headers coated by NitroPlate, what is the proper breakin procedure? I had a set coated by NitroPlate some time ago and I am just getting ready to use them. Also,is there a product I should use to wipe them down with before starting the engine?

Thank you.

We didn't have a break in procedure because our coatings (Nitroplate) were completely cured before they were shipped to the customer. One thing you need to be sure of though, is that you are jetted (tuned) pretty close at intitial start up. You can use any kind of aluminum polish to clean them also.

[Greg West]

Thanks for the reply.