LS Hydraulic Rollers

[Mark Yacavone]

Originally Posted by ss3011

Just an FYI , I have been rebuilding a 3800 for a Firebird street car and discovered that while the lifters look the same between the 3800 and the Chevy lifters , the pushrod seat is different . You will need about a .100 shorter pushrod if you use a Chevy lifter .

Thanks for that info, Russ
I planned on new push rods too, ordered to the length I'll need, so we'll pick up on that, at that time.
The checking lifter we have is from an LS build too, so should be all good.