HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock
Register Photo Gallery FAQ Community Calendar

Reply
 
Thread Tools Display Modes
Old 07-19-2018, 01:21 PM   #1
James Perrone
VIP Member
 
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,688
Likes: 3,399
Liked 1,840 Times in 428 Posts
Default Re: Poking the Bear Ford Performance Products

Quote:
Originally Posted by Jim D'Amore View Post
Gump,


The 4.0L is legal for Showdown according to NHRA, they actually approved the 4.0L combination. As long as Ford is willing to put it into the showdown guide. As for a common supercharger I even told Mike D. lets take the 4.0L off and exchange it for a 2.9L. His answer was still no.


Lets get to the facts here...the 4.0L supercharger with the 4.00" pulley on it will spin 6,000 RPM slower at 8,500 engine RPM. The 4.0L supercharger is also a rear entry requiring 2 90* turns before the air hits the impellers. The 4.0L takes 32 more HP to turn it than a 2.9L. It only produces on the 5.4L engine right around 20-21 psi boost. Compared to the 2.9L's that make 26-28 psi. Due to its new Gen 3 rotor design and the front entry feed. Here is the big fact Gentlemen. The 5.4L set to NHRA's max allowed bore, compared to GM and Mopar's max allowed bore we are 30 cubic inches less than COPO and 34 cubic inches less than MOPAR. So even if we had the same amount of boost the with the 4.0L we would still be at a disadvantage with the 5.4L because of cubic inch. We would still be bringing a knife to a gun fight but it's still better than what we currently have in the 08,10, and 12 CJ's.


Jim D'Amore
But you have multiple cam shafts and 3 valves per cylinder
And you want a bigger piston? This ain’t nascar. All 3 manufacturers do it differently
Sounds like you need to get another combo. Seems like Watson goes fast and is competitive
__________________
james perrone 1290 STK
James Perrone is offline   Reply With Quote
Old 07-19-2018, 02:13 PM   #2
Larry Hill
Live Reporter
 
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,661
Likes: 1,952
Liked 10,813 Times in 2,247 Posts
Default Re: Poking the Bear Ford Performance Products

James the 5.4 has four valves per cylinder, the 281 has three valves
__________________
IHM Used Parts
https://ihmusedparts.com
888-821-1817
Larry Hill is offline   Reply With Quote
Old 07-19-2018, 11:34 PM   #3
Jim D'Amore
Sponsor
 
Jim D'Amore's Avatar
 
Join Date: Jun 2013
Posts: 139
Likes: 2
Liked 66 Times in 17 Posts
Default Re: Poking the Bear Ford Performance Products

Quote:
Originally Posted by James Perrone View Post
But you have multiple cam shafts and 3 valves per cylinder
And you want a bigger piston? This ain’t nascar. All 3 manufacturers do it differently
Sounds like you need to get another combo. Seems like Watson goes fast and is competitive
James

Bigger piston.??

Would you mind explaining.

And you are right I will have to get another combo one that they choose. (Ford)

Jim D'Amore
__________________
Jim D'Amore is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.