SS/CS accepted heads

FireSale · 07-25-2018, 12:11 PM

Ford makes a head that fits the SS/CS spec of "Inline iron" called the N351. It is primarily for short track circle track racing. I did a lot of digging on this head and found it on the 1/8 mile record holding Mustang of Venice Perno.

It has a Ford part number, M-6049 N351, so it's not technically "aftermarket". Got mine from Speedway Motors. Require offset rockers and special headers.

links:
http://dragracecanada.com/ontario-ford-aficionado/

.

07-25-2018, 12:11 PM	#4
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: SS/CS accepted heads Ford makes a head that fits the SS/CS spec of "Inline iron" called the N351. It is primarily for short track circle track racing. I did a lot of digging on this head and found it on the 1/8 mile record holding Mustang of Venice Perno. It has a Ford part number, M-6049 N351, so it's not technically "aftermarket". Got mine from Speedway Motors. Require offset rockers and special headers. links: http://dragracecanada.com/ontario-ford-aficionado/ . __________________ Dale Shearon 68 Mustang 6394