Flaming River Steering Box in a 69 Camaro

[Brian Oakes]

Mike are you sure you used a vega pittman arm, Vega,s are straight one's, Camaro's have a dip in them.

[Hacksaw]

Originally Posted by Brian Oakes

Mike are you sure you used a vega pittman arm, Vega,s are straight one's, Camaro's have a dip in them.

Brian: I think the OEM Vega arm does have an offset and all the aftermarket ones are straight. ?????

[Mike Pearson]

Originally Posted by Brian Oakes

Mike are you sure you used a vega pittman arm, Vega,s are straight one's, Camaro's have a dip in them.

Yes. I used the straight one. I needed to lower the drag link to clear the oil pan. The straight pittman arm gave enough clearance. I did have to lower the idler arm on the opposite side to match. Then a bump steer kit to lower the tie rod end at the spindle to correct that geometry. Worked out pretty nice.