Mounting weight in car?

[Hacksaw]

Originally Posted by Jeff Stout

The way I have read the rules there are 3 forms or types of ways to install weight or ballast.
1- 2 weight boxes that weigh 100lbs each
2- 100 lbs of bolted to frame removable weight
3- Bolting and welding permanent weight
Total of 500 lbs max.
Asking as I need to add like another whole car of weight on Olds wagon. It is way to light for T or U/sa

No. The 2 allowable weight boxes can not weigh more than 100 lbs. each including the contents and only a max of 100 is considered removable. Yes. Up to a max of 100 can be bolted to the frame and this is " removable ". Yes. A total of 500 lbs. is allowed but the holding hardware needs to have a shot of weld to satisfy the permanent requirement. So if you need, say 460 lbs. , then figure a way to put 400 in as permanent and make a box to handle close to 100 and you're all set.

[Jeff Stout]

Originally Posted by Hacksaw

No. The 2 allowable weight boxes can not weigh more than 100 lbs. each including the contents and only a max of 100 is considered removable. Yes. Up to a max of 100 can be bolted to the frame and this is " removable ". Yes. A total of 500 lbs. is allowed but the holding hardware needs to have a shot of weld to satisfy the permanent requirement. So if you need, say 460 lbs. , then figure a way to put 400 in as permanent and make a box to handle close to 100 and you're all set.

He is what I'm thinking of doing.
200lb bolted and welded
100 lb. Bolted
1 weight box with contents 100lb
Does this work?