|
![]() |
#11 |
VIP Member
Join Date: Jun 2007
Location: from Vancouver BC Canada, now in Nova Scotia
Posts: 1,306
Likes: 309
Liked 1,081 Times in 297 Posts
|
![]()
Mike, do you happen to know the part numbers for the NAPA bearings and seals? Do you just tell the counterman that you have Dexter 5200 lb axles, and that is enough info for them? My trailer tires are not show any unusual tire wear, but it does seem odd that the bearings on the front axle looked fine, but the rears looked so bad. I wonder if the torsion axles are more sensitive to load distribution than leaf spring axles with a center pivot link. My trailer looks level while towing.
__________________
NHRA 6390 STK M/S 85 Mustang |
![]() |
![]() |
![]() |
#12 |
VIP Member
Join Date: Mar 2007
Posts: 2,435
Likes: 608
Liked 1,903 Times in 571 Posts
|
![]()
These are the NAPA numbers that I have been using. I have a small tool box in the trailer that I keep a spare set, grease and a grease gun.
PBR25580 inner bearing PBR25520 inner race PBR6 - outer bearing and race 22532 seal
__________________
Mike Pearson 2485 SS |
![]() |
![]() |
![]() |
|
|