Gen 3 hemi cam bearing spacers

Larry Hill · 08-22-2019, 06:13 AM

EDM a bearing and take a look.

Stewart Way · 08-22-2019, 07:16 PM

EDM on the roller bearing would give me a 60mm journal. Don't know the life expectancy of roller bearings either but won't have a lot of spring load. May find a 60mm blank but I tried 65mm for the regular bearing and no luck. High HP performance said that cam spacers in the past were $1500. This is the block we talked about in the past. The Bryant crank is cut to LS main size for the regular type thrust bearing. 2.95 stroke for 305 inch so usless for anything serious. Carillo rods at 6.5" and honda rod bearings. Don't have much in it but hate to make a coffee table out of it. Maybe later for a project.

ss3011 · 08-22-2019, 09:11 PM

You may want to try Militia Racing Products . Roller bearings don't need a lot of oil to keep them happy , especially if they are not under a lot of load . Charlie can make his own cam cores , so that shouldn't be a problem .

08-22-2019, 06:13 AM	#1
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,663 Likes: 1,954 Liked 10,830 Times in 2,251 Posts	Re: Gen 3 hemi cam bearing spacers EDM a bearing and take a look. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

08-22-2019, 07:16 PM	#2
Stewart Way Member Join Date: Aug 2003 Location: Atlanta Posts: 476 Likes: 20 Liked 70 Times in 22 Posts	Re: Gen 3 hemi cam bearing spacers EDM on the roller bearing would give me a 60mm journal. Don't know the life expectancy of roller bearings either but won't have a lot of spring load. May find a 60mm blank but I tried 65mm for the regular bearing and no luck. High HP performance said that cam spacers in the past were $1500. This is the block we talked about in the past. The Bryant crank is cut to LS main size for the regular type thrust bearing. 2.95 stroke for 305 inch so usless for anything serious. Carillo rods at 6.5" and honda rod bearings. Don't have much in it but hate to make a coffee table out of it. Maybe later for a project. __________________ Stewart Way 2424 SS

08-22-2019, 09:11 PM	#3
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 909 Likes: 70 Liked 239 Times in 114 Posts	Re: Gen 3 hemi cam bearing spacers You may want to try Militia Racing Products . Roller bearings don't need a lot of oil to keep them happy , especially if they are not under a lot of load . Charlie can make his own cam cores , so that shouldn't be a problem .