4th Gen Rearend

mtwilly · 09-07-2019, 12:04 AM

Thank you all for the input. I appreciate it. I will see what I can find out for offset on 10" wheels.

jimmyparker · 09-07-2019, 09:34 AM

The rear ends under these cars are not stock width, a stock width rear end would be too wide. Most of the f body cars I've built had a 60" or so axle flange to axle flange rear end. As mentioned earlier if you have the wheels and tires that will be used on the car you can get a more accurate measurement.

09-07-2019, 12:04 AM	#1
mtwilly Junior Member Join Date: May 2009 Posts: 31 Likes: 8 Liked 4 Times in 1 Post	Re: 4th Gen Rearend Thank you all for the input. I appreciate it. I will see what I can find out for offset on 10" wheels.

09-07-2019, 09:34 AM	#2
jimmyparker Member Join Date: Oct 2009 Location: columbus, georgia Posts: 385 Likes: 65 Liked 309 Times in 88 Posts	Re: 4th Gen Rearend The rear ends under these cars are not stock width, a stock width rear end would be too wide. Most of the f body cars I've built had a 60" or so axle flange to axle flange rear end. As mentioned earlier if you have the wheels and tires that will be used on the car you can get a more accurate measurement.