keep working on your stuff

Dan Walcott · 12-25-2019, 11:52 AM

Quote:

Originally Posted by Larry Hill

Sometimes the dyno is the best place to spend. It will be your report card and road map.

I was at the dyno last week, showed improvement, made some changes, and going back next week for some more pulls.

Larry Hill · 12-25-2019, 06:43 PM

Dan, It sounds like you have the needle in deep........don't it feel good!

Dan Walcott · 12-26-2019, 10:41 AM

Quote:

Originally Posted by Larry Hill

Dan, It sounds like you have the needle in deep........don't it feel good!

Yes it does!! And I like it !! I started this project in 1981, to stubborn to give up on it, (admitting I'm not the sharpest knife in the drawer) , I will keep plugging away , looking for a tidbit here and a crumb there.

Enjoy the Holidays , 2020 is just around the corner..

Patric Fox · 12-27-2019, 12:58 PM

Good for you G, I know with your combination you have to work hard. Can't go out and buy go fast parts and bolt them on. I am in the same situation, working full time, travel with work, and working on customers stuff before the race car. But I am going to keep working just like you. Good luck this coming year.

gmonde · 12-28-2019, 10:15 PM

Patrick Thanks and to the fellow racers who replied to this post,also to the people who helped in finding more performance ,i am waiting for my crank to comeback from balancing as the final part needed to start reassembly
Of the engine with hopes of testing in late April ,,,first race is @ Atco in may

12-25-2019, 06:43 PM	#2
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,664 Likes: 1,954 Liked 10,835 Times in 2,252 Posts	Re: keep working on your stuff Dan, It sounds like you have the needle in deep........don't it feel good! __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 12-26-2019 at 07:21 AM.

12-27-2019, 12:58 PM	#4
Patric Fox Member Join Date: Jul 2007 Location: Pottstown,Pa. Posts: 121 Likes: 24 Liked 11 Times in 8 Posts	Re: keep working on your stuff Good for you G, I know with your combination you have to work hard. Can't go out and buy go fast parts and bolt them on. I am in the same situation, working full time, travel with work, and working on customers stuff before the race car. But I am going to keep working just like you. Good luck this coming year.

12-28-2019, 10:15 PM	#5
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: keep working on your stuff Patrick Thanks and to the fellow racers who replied to this post,also to the people who helped in finding more performance ,i am waiting for my crank to comeback from balancing as the final part needed to start reassembly Of the engine with hopes of testing in late April ,,,first race is @ Atco in may