Cylinder head heat crossover?

HP HUNTER · 04-02-2020, 11:35 PM

Quote:

Originally Posted by Mark Yacavone

I don't know that you can't block the intake, if they let you fill the head all the way down to the port.
You could take a chunk of 1/4 " aluminum or steel and make a plug with tapered sides, and bang it in there.
No bubble packs here, unless we have to.

"No bubble packs here"

I could of sworn that was you standing in the window waiting for the UPS truck intently LOL

Myron Piatek · 04-03-2020, 12:41 PM

On applications that can use sheetmetal to block the crossover, I've had good luck with aluminum (thicker than cans) if glued & coated on the inside with a good hi-temp silicone to help insulate it.

04-03-2020, 12:41 PM	#2
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Cylinder head heat crossover? On applications that can use sheetmetal to block the crossover, I've had good luck with aluminum (thicker than cans) if glued & coated on the inside with a good hi-temp silicone to help insulate it. __________________ LOCOMOTION Racing