|
|
![]() |
#1 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,180
Likes: 1,074
Liked 799 Times in 236 Posts
|
![]()
This is an assembly line installed Dana/Spicer 44 rear in an '82 Z28:
![]() But back to Rod's question...why wouldn't you want to run a 12 bolt? -Al
__________________
"That'll never work....." |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,504
Likes: 3,606
Liked 7,814 Times in 1,748 Posts
|
![]()
Well, I stand corrected.
__________________
Billy Nees 1188 STK, SS I'm not spending 100K to win 2K |
![]() |
![]() |
Liked |
![]() |
#3 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,180
Likes: 1,074
Liked 799 Times in 236 Posts
|
![]()
Billy, many years ago I parted out one of these cars for the engine. I didn't want to let the shell go with the Spicer rear in it but a hard hit on the rt. rear had tweaked the caliper and rotor and I figured the axle tube was wonky. In retrospect, I should have pulled the rear end.
![]()
__________________
"That'll never work....." Last edited by Alan Nyhus; 05-04-2020 at 07:40 AM. |
![]() |
![]() |
![]() |
|
|