Goodyear Tires

Adger Smith · 07-24-2020, 01:30 PM

Anyone running the 2019 Goodyear in SS?
Do they come close to the specs listed?
Good life in a 3400 car?

Dragsinger · 07-24-2020, 05:11 PM

Adger, I am considering the same decision. My Lamplighter project will be about 3100 pounds and around 725 horse with expected ET 5.90's range. I am interested in the feedback also.

Adger Smith · 07-25-2020, 12:33 AM

Larry, the problem I have is the tire height that will fit my car.
I know 14 X 32 on a 14" rim is too tall to even go under the car. (front hits)
I use a 1702 GY way back before they were discontinued. they were 14.5 wide and 96 1/4 roll out with stiff sidewalls.
I parked everything in 2010 and the set I have are not even good for doorstops.
I need between a 96 and 97 in roll out.
Don't see any good radials in that size.
Looks like I might be stuck with a bias tire again.
My car will start off at about 3400 lbs and then move to a 3175 lb class weight when the drivers license is taken care of.
I was real happy with the GY's. I put a lot of passes on 2 sets.
Larry if you get any private feed back I'm interested.

Dragsinger · 07-25-2020, 06:26 AM

Adger, are you building the Quay Camaro you have had for a while? If so, what class and what equipment?

nickh · 07-25-2020, 09:02 AM

Adger have you looked at Phoenix tires?

Adger Smith · 07-25-2020, 11:14 AM

Larry,
I still have the Quay car and finishing it is on hold.
I'm putting the "Red" Gen 3 back together with the V-6
Probably run SS/CX @ 3400 lbs and SS/BX in the 3,000 lb area.
Car is built over weight for SS/BX by more than 100 lbs.
That (weight) is the reason I bought the Quay car project.. Less weight..
If my health doesn't improve a bunch someone might have to finish it.

Nickh
Yes, I have a set of Pheonix that were supposed to fit, but didn't.
The car was built a long time ago for a short tire.
• Brand: Phoenix
• Product Size: 13.0/31.0-15
• SKU: PH379
• GTIN UPC: 00842199101164
• Rim Diameter: 15
• Tread Width: 13.40
• Section Width (Actual): 15.00
• Overall Diameter: 30.60
• Circumference: 96"
• Recommended Rim Width: 12.00
I've been looking at these Hoosiers, but didn't want to buy another set that didn't fit.
18240 Hoosier 31. X 14.5 14" tread 31.2 cir 98" roll out 12-14 rim 16.5 section D05 compound
It is a shame I can't find a radial that size. They seem to be bigger or smaller. It would be nice if MT had a Pro Bracket radial between 94" and 100" and wider than 10"
I liked the stiff sidewall GY. The car was always hard on them @3400 and they worked well. The weight and tons of gear it take is a tire killer. It was always a fine balance of air pressure and converter hit. Really a shame GY quit that tire... Progress, Is that what they call it?? lol

bykr · 07-25-2020, 02:11 PM

Have you looked at the M/T 13.5x29.5 bias slick?

Dragsinger · 07-25-2020, 03:13 PM

Adger, are the Phoenix new?

Adger Smith · 07-25-2020, 05:52 PM

yes,
Larry, I killed my phone about 9 mos. ago and lost your contact.
mine is 903 eight two four4924

Chip THELEGEND Johnson · 07-25-2020, 09:07 PM

We run the 9x30 radial on all Daren Poole-Adams cars. Copos weigh 3200 ish and low 9 second times. Get great life from the Goodyear tires

07-24-2020, 01:30 PM	#1
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Goodyear Tires Anyone running the 2019 Goodyear in SS? Do they come close to the specs listed? Good life in a 3400 car? __________________ Adger Smith (Former SS)

07-24-2020, 05:11 PM	#2
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Goodyear Tires Adger, I am considering the same decision. My Lamplighter project will be about 3100 pounds and around 725 horse with expected ET 5.90's range. I am interested in the feedback also. __________________ Larry Woodfin 471W

07-25-2020, 12:33 AM	#3
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Goodyear Tires Larry, the problem I have is the tire height that will fit my car. I know 14 X 32 on a 14" rim is too tall to even go under the car. (front hits) I use a 1702 GY way back before they were discontinued. they were 14.5 wide and 96 1/4 roll out with stiff sidewalls. I parked everything in 2010 and the set I have are not even good for doorstops. I need between a 96 and 97 in roll out. Don't see any good radials in that size. Looks like I might be stuck with a bias tire again. My car will start off at about 3400 lbs and then move to a 3175 lb class weight when the drivers license is taken care of. I was real happy with the GY's. I put a lot of passes on 2 sets. Larry if you get any private feed back I'm interested. __________________ Adger Smith (Former SS)

07-25-2020, 06:26 AM	#4
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Goodyear Tires Adger, are you building the Quay Camaro you have had for a while? If so, what class and what equipment? __________________ Larry Woodfin 471W

07-25-2020, 09:02 AM	#5
nickh Senior Member Join Date: Sep 2010 Location: Houston,Texas Posts: 819 Likes: 3,535 Liked 642 Times in 192 Posts	Re: Goodyear Tires Adger have you looked at Phoenix tires?

07-25-2020, 11:14 AM	#6
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Goodyear Tires Larry, I still have the Quay car and finishing it is on hold. I'm putting the "Red" Gen 3 back together with the V-6 Probably run SS/CX @ 3400 lbs and SS/BX in the 3,000 lb area. Car is built over weight for SS/BX by more than 100 lbs. That (weight) is the reason I bought the Quay car project.. Less weight.. If my health doesn't improve a bunch someone might have to finish it. Nickh Yes, I have a set of Pheonix that were supposed to fit, but didn't. The car was built a long time ago for a short tire. • Brand: Phoenix • Product Size: 13.0/31.0-15 • SKU: PH379 • GTIN UPC: 00842199101164 • Rim Diameter: 15 • Tread Width: 13.40 • Section Width (Actual): 15.00 • Overall Diameter: 30.60 • Circumference: 96" • Recommended Rim Width: 12.00 I've been looking at these Hoosiers, but didn't want to buy another set that didn't fit. 18240 Hoosier 31. X 14.5 14" tread 31.2 cir 98" roll out 12-14 rim 16.5 section D05 compound It is a shame I can't find a radial that size. They seem to be bigger or smaller. It would be nice if MT had a Pro Bracket radial between 94" and 100" and wider than 10" I liked the stiff sidewall GY. The car was always hard on them @3400 and they worked well. The weight and tons of gear it take is a tire killer. It was always a fine balance of air pressure and converter hit. Really a shame GY quit that tire... Progress, Is that what they call it?? lol __________________ Adger Smith (Former SS)

07-25-2020, 02:11 PM	#7
bykr Member Join Date: Jan 2014 Location: SoCal Posts: 232 Likes: 274 Liked 167 Times in 81 Posts	Re: Goodyear Tires Have you looked at the M/T 13.5x29.5 bias slick? __________________ Tim Schmackpfeffer 762 SS

07-25-2020, 03:13 PM	#8
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Goodyear Tires Adger, are the Phoenix new? __________________ Larry Woodfin 471W

07-25-2020, 05:52 PM	#9
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Goodyear Tires yes, Larry, I killed my phone about 9 mos. ago and lost your contact. mine is 903 eight two four4924 __________________ Adger Smith (Former SS)

07-25-2020, 09:07 PM	#10
Chip THELEGEND Johnson Member Join Date: Jun 2007 Posts: 284 Likes: 223 Liked 281 Times in 79 Posts	Re: Goodyear Tires We run the 9x30 radial on all Daren Poole-Adams cars. Copos weigh 3200 ish and low 9 second times. Get great life from the Goodyear tires