|
![]() |
#4 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 909
Likes: 70
Liked 239 Times in 114 Posts
|
![]()
Could be too much pressure from the pump feed the regulator . Try reducing it down to 15 psi . Also I have had problems with debris getting caught under the regulating ball inside the regulator , pressure to the carb goes way up . I can usually recover by shutting off the pump while the engine is running then after most of the fuel gets used up in the carb , turn the pump back on , and usually the flow will flush out the debris .
|
![]() |
![]() |
|
|