fuel pressure question

rboyle · 10-07-2020, 10:23 AM

I used Aeromotive pump and Magnafuel regulator -10an return and vent and feed to regulator

jamie2370 · 10-07-2020, 10:33 AM

So far looks like it was the N/S in the carb, took it apart and cleaned everything. Tried the reg off our other stocker and it went right to 6.5. Put my Product Eng reg back on that was set as low as I could get it to 6. It was then at 3. So I was able to screw it in to get 6.5. Much better. No more trying to crank like the timing is too high lol. It cranks from outside the car now. Now to change the oil and hope my brand new total seal rings didn't get washed down....oh and fixed my cracked 200 that lost second gear and cost me a round win. Get you a Stocker....it'll be fun they said

10-07-2020, 10:23 AM	#1
rboyle Senior Member Join Date: Jan 2015 Posts: 608 Likes: 1,461 Liked 598 Times in 164 Posts	Re: fuel pressure question I used Aeromotive pump and Magnafuel regulator -10an return and vent and feed to regulator

10-07-2020, 10:33 AM	#2
jamie2370 Member Join Date: Dec 2014 Location: Perry, GA Posts: 331 Likes: 11 Liked 239 Times in 90 Posts	Re: fuel pressure question So far looks like it was the N/S in the carb, took it apart and cleaned everything. Tried the reg off our other stocker and it went right to 6.5. Put my Product Eng reg back on that was set as low as I could get it to 6. It was then at 3. So I was able to screw it in to get 6.5. Much better. No more trying to crank like the timing is too high lol. It cranks from outside the car now. Now to change the oil and hope my brand new total seal rings didn't get washed down....oh and fixed my cracked 200 that lost second gear and cost me a round win. Get you a Stocker....it'll be fun they said