Winters Shifter Adjustment...is killing me!!

OkieRocket · 10-31-2020, 08:18 PM

Thanks for the info. Lew. I had to mount the ball and the Cable on the "outside," so I could route the shift cable through a welded in tube that runs through my crossmember, otherwise the cable would be in a bind (side-to-side).

Although I see that Winters shows the ball and Cable on the "inside" of the brackets, respectfully Lew, I don't see how that would necessarily make any difference, as both are on the same "center-to-center distance".....I may be all wet Lew, but I don't see how the ball and Cable on the "outside" would cause my problem.
......Still trying to figure things out.
Thanks for your responses.

10-31-2020, 08:18 PM	#5
OkieRocket Junior Member Join Date: Aug 2016 Posts: 43 Likes: 12 Liked 6 Times in 5 Posts	Re: Winters Shifter Adjustment...is killing me!! Thanks for the info. Lew. I had to mount the ball and the Cable on the "outside," so I could route the shift cable through a welded in tube that runs through my crossmember, otherwise the cable would be in a bind (side-to-side). Although I see that Winters shows the ball and Cable on the "inside" of the brackets, respectfully Lew, I don't see how that would necessarily make any difference, as both are on the same "center-to-center distance".....I may be all wet Lew, but I don't see how the ball and Cable on the "outside" would cause my problem. ......Still trying to figure things out. Thanks for your responses.